The hydrological influence of black locust plantations in the loess area of northwest China     

Wang Yanhui 《水文研究》1992,6(2):241-251

Black locust (Robina pseudoacacia) has become one of the most important shelter species in the loess area of northwest China. This paper summarizes recent research concerning its hydrological influence, including canopy interception, litter absorption capacity, its effect on rainfall kinetic energy, infiltration rates, surface runoff, soil moisture, and evapotranspiration, and its role in soil conservation. Several predictive models are listed. on the basis of existing results, optimum characteristics for an effective plantation are defined, and problems requiring further research are identified.  相似文献   

Lunar Prospector measurements of secondary electron emission from lunar regolith     

J.S. Halekas  G.T. Delory  T.J. Stubbs  W.M. Farrell 《Planetary and Space Science》2009,57(1):78-82

We present the first in situ measurements of the secondary electron emission efficiency of lunar regolith, utilizing Lunar Prospector measurements of secondary electrons emitted from the negatively charged night side and accelerated upward by surface electric fields. By comparing measurements of secondary currents emitted from the surface and incident primary electron currents, we find that the secondary yield of lunar regolith is a factor of ∼3 lower than that measured for samples in the laboratory. This lower yield significantly affects current balance at the lunar surface and the resulting equilibrium surface potentials. This information must be folded into models of the near-surface plasma sheath, in order to predict the effects on dust and other components of the lunar environment, and ultimately determine the importance for surface exploration and scientific investigations on the Moon.  相似文献   

Subfilter-scale Fluxes over a Surface Roughness Transition. Part I: Measured Fluxes and Energy Transfer Rates     

Matthew A. Carper  Fernando Porté-Agel 《Boundary-Layer Meteorology》2008,126(1):157-179

A wind-tunnel experiment was designed and carried out to study the effect of a surface roughness transition on subfilter-scale (SFS) physics in a turbulent boundary layer. Specifically, subfilter-scale stresses are evaluated that require parameterizations and are key to improving the accuracy of large-eddy simulations of the atmospheric boundary layer. The surface transition considered in this study consists of a sharp change from a rough, wire-mesh covered surface to a smooth surface. The resulting magnitude jump in aerodynamic roughnesses, M = ln(z ₀₁/z ₀₂), where z ₀₁ and z ₀₂ are the upwind and downwind aerodynamic surface roughnesses respectively, is similar to that of past experimental studies in the atmospheric boundary layer. The two-dimensional velocity fields used in this study are measured using particle image velocimetry and are acquired at several positions downwind of the roughness transition as well as over a homogeneous smooth surface. Results show that the SFS stress, resolved strain rate and SFS transfer rate of resolved kinetic energy are dependent on the position within the boundary layer relative to the surface roughness transition. A mismatch is found in the downwind trend of the SFS stress and resolved strain rate with distance from the transition. This difference of behaviour may not be captured by some eddy-viscosity type models that parameterize the SFS stress tensor as proportional to the resolved strain rate tensor. These results can be used as a benchmark to test the ability of existing and new SFS models to capture the spatial variability SFS physics associated with surface roughness heterogeneities.  相似文献   

Influence of the surface microlayer on the flux of nonconservative trace gases (CO,H2, CH4, N2O) across the ocean-atmosphere interface     

Ralf Conrad  Wolfgang Seiler 《Journal of Atmospheric Chemistry》1988,6(1-2):83-94

Gas exchange experiments were conducted in the tropical Atlantic Ocean during a ship expedition with FS Meteor using a small rubber raft. The temporal change of the mixing ratios of CO, H₂, CH₄ and N₂O in the headspace of a floating glass box and the concentrations of these gases in the water phase were measured to determine their transfer velocities across the ocean-atmosphere interface. The ocean acted as a sink for these gases when the water was undersaturated with respect to the mixing ratio in the headspace. The transfer velocities were different for the individual gases and showed still large differences even when normalized for diffusivity. Applying the laminar film model, film thicknesses of 20 to 70 m were calculated for the observed flux rates of the different gas species. When the water was supersaturated with respect to atmospheric CO, H₂, CH₄ and N₂O, the transfer velocities of the emission process were smaller than those determined for the deposition process. In case of H₂ and CH₄, emission was even not calculable although, based on the observed gradient, the laminar film model predicted significant fluxes at the air-sea interface. The results are interpreted by destruction processes active within the surface microlayer.  相似文献   

Tectonics and surface effects of the supercontinent Columbia   总被引：8，自引：2，他引：8  

John J.W. Rogers  M. Santosh 《Gondwana Research》2009,15(3-4):373-380

Assembly of the supercontinent Columbia at about 1.85–1.90 Ga coincided with several events that affected the entire earth. The oldest worldwide network of orogenic belts formed at the same time. Although some granite–granodiorite (GG) suites had formed earlier, the GG suites became common in the 1.8–1.9 Ga orogenic belts. These suites succeeded the older tonalite–trondhjemite–granodiorite (TTG) suites, which were not produced after 1.8 Ga. Changes on the earth's surface at 1.8–1.9 Ga include rapid increase in the concentration of oxygen in the atmosphere and oceans and probably the evolution of eukaryotes. All of these surface changes occurred as Columbia accreted, and the assembly of Columbia may have contributed to the drastic changes in the earth's surface environment as well as to the evolution of primitive life forms.  相似文献   

Geomorphic changes in Ras Al-Subiyah area,Kuwait     

A. Al Hurban  H. El-Gamily  A. El-Sammak 《Environmental Geology》2008,54(7):1377-1390

The Ras Al-Subiyah area is considered one of the most promising areas in Kuwait for future development. This development will include a new town called Subiyah and its associated infrastructure. This area is also being considered as the location for connection between Boubyan Island, which is now undergoing major development and the Kuwait mainland. The present study investigates the geomorphology of the Ras Al-Sabiyah area in the northern sector of Kuwait. The study area is generally flat, and it is located west of the Jal Az-Zor escarpment. It is bordered on the east by the Khor Al-Sabiyah tidal channel and on the south by Kuwait Bay. The area receives sediments from several sources; currently the most important are aeolian sediments and the deposition of mud delivered through the Khor Al-Sabiyah from the Iraqi marshes. The study area has been subjected to severe environmental changes due to the Gulf wars and the drainage of Iraqi marshes and the associated artificial changes in fluvial system. Twenty-two surface sediments were collected from the Ras Al-Subiyah area. Samples were collected to include the main geomorphologic characteristic features of the study area. Field observations and remote sensing images from 1990 and 2001 were used to produce an updated geomorphologic map for the Ras Al-Subiyah and a map showing geomorphic changes between 1990 and 2001. Grain size of the surface sediment ranges from gravel to medium sand. In general, grain size statistical analysis indicates that most of the areas are composed of two or more classes of sands transported and deposited from different sources including aeolian, sabkhas, river and the bays. The variability in the grain size statistical parameters may be attributed to the complexity of surface morphology as well as the diversity in the type of depositional environment in the Ras Al-Subiyah area. The total area subjected to change during the 12-year period (1990–2001) is about 32 km² as calculated using GIS techniques.  相似文献   

    

Aisha R. Morris  Peter J. Mouginis-Mark 《Icarus》2010,209(2):369-181

Candidate examples of impact melt flows and debris flows have been identified at Tooting crater, an extremely young (<2 Myr), 29 km diameter impact crater in Amazonis Planitia, Mars. Using HiRISE and CTX images, and stereo-derived digital elevation models derived from these images, we have studied the rim and interior wall of Tooting crater to document the morphology and topography of several flow features in order to constrain the potential flow formation mechanisms. Four flow types have been identified; including possible impact melt sheets and three types of debris flows. The flow features are all located within 2 km of the rim crest on the southern rim or lie on the southern interior wall of the crater ∼1500 m below the rim crest. Extensive structural failure has modified the northern half of the crater inner wall and we interpret this to have resulted in the destruction of any impact melt emplaced, as well as volatile-rich wall rock. The impact melt flows are fractured on the meter to decameter scale, have ridged, leveed lobes and flow fronts, and cover an area >6 km × 5 km on the southern rim. The debris flows are found on both the inner wall and rim of the crater, are ∼1-2 km in length, and vary from a few tens of meters to >300 m in width. These flows exhibit varying morphologies, from a channelized, leveed flow with arcuate ridges in the channel, to a rubbly flow with a central channel but no obvious levees. The flows indicate that water existed within the target rocks at the time of crater formation, and that both melt and fluidized sediment was generated during this event.  相似文献   

Patos Lagoon outflow within the Río de la Plata plume using an airborne salinity mapper: Observing an embedded plume     

Derek Burrage  Joel Wesson  Carlos Martinez  Tabare Pérez  Osmar Möller Jr.  Alberto Piola 《Continental Shelf Research》2008

Major river systems discharging into continental shelf waters frequently form buoyant coastal currents that propagate along the continental shelf in the direction of coastal trapped wave propagation (with the coast on the right/left, in the northern/southern hemisphere). The combined flow of the Uruguay and Paraná Rivers, which discharges freshwater into the Río de la Plata estuary (Lat. ∼36°S), often gives rise to a buoyant coastal current (the ‘Plata plume’) that extends northward along the continental shelf off Uruguay and Southern Brazil. Depending upon the prevailing rainfall, wind and tidal conditions, the Patos/Mirim Lagoon complex (Lat. ∼32°S) may also produce a freshwater outflow plume that expands across the inner continental shelf. Under these circumstances the Patos outflow plume can be embedded in temperature, salinity and current fields that are strongly influenced by the larger Plata plume. The purpose of this paper is to present observations of such an embedded plume structure and to determine the dynamical characteristics of the ambient and embedded plumes.  相似文献   

    

M. C. Slattery  T. P. Burt  J. Boardman 《地球表面变化过程与地形》1994,19(4):377-385

Rill erosion is an important erosional form on agricultural soils in England, causing large losses of soil, particularly on cultivated slopes. This paper describes a rill system that developed in a small agricultural catchment in north Oxfordshire during the winter of 1992–93. The rill system comprised two components: a system of ‘feeder rills’ along the valley-side slopes, which were the result of flow concentration and erosion along wheelings, and a thalweg rill, which formed along a dry valley bottom as a result of surface runoff concentration from the feeder rills. Total volumetric soil loss from the rill system was 32·28 m³, equivalent to 3·01 m³, ha^?1 for the rill catchment area, or 3·91 t ha^?1. Mean discharge for the thalweg rill and feeder rills, calculated during a storm event, was 31·101s^?1 and 1·171s^?1, respectively. All flows were fully turbulent and supercritical. We emphasize the need for a spatially distributed approach to the study of runoff and erosion at the catchment scale.  相似文献   

VIV and galloping of single circular cylinder with surface roughness at 3.0×10≤Re≤1.2×10     

Che-Chun Chang  Michael M. Bernitsas 《Ocean Engineering》2011,38(16):1713-1732

Passive Turbulence Control (PTC) in the form of selectively distributed surface roughness is used to alter Flow Induced Motion (FIM) of a circular cylinder in a steady flow. The objective is to enhance FIM's synchronization range and amplitude, thus maximizing conversion of hydrokinetic energy into mechanical energy by oscillator in vortex-induced vibration and/or galloping. Through additional viscous damping, mechanical energy is converted to electrical harnessing clean and renewable energy from ocean/river currents. High Reynolds numbers (Re) are required to reach the high-lift TrSL3 (Transition-Shear-Layer-3) flow regime. PTC trips flow separation and energizes the boundary layer, thus inducing higher vorticity and consequently lift. Roughness location, surface coverage, and size are studied using systematic model tests with broad-field laser visualization at 3.0×10⁴<Re<1.2×10⁵ in the low-turbulence free-surface water-channel of the Marine Renewable Energy Laboratory of the University of Michigan. Test results show that 16° roughness coverage is effective in the range (10°-80°) inducing reduced vortex-induced vibration (VIV), enhanced VIV, or galloping. Range of synchronization may increase or decrease, galloping amplitude of oscillation reaches three diameters; wake structures change dramatically reaching up to ten vortices per cycle. Conversion of hydrokinetic energy to mechanical is enhanced strongly with proper PTC.  相似文献